Export iten: EndNote BibTex

Please use this identifier to cite or link to this item: http://tede.upf.br:8080/jspui/handle/tede/276
???metadata.dc.type???: Dissertação
Title: Avaliação do desempenho de argamassa de revestimento com resíduos de construção e demolição aplicando a metodologia de projeto robusto
???metadata.dc.creator???: Maculan, Laércio Stolfo 
???metadata.dc.contributor.advisor1???: Prietto, Pedro Domingos Marques
Silveira, Adriana Augustin
???metadata.dc.description.resumo???: A indústria da construção civil é responsável por grande parte dos resíduos gerados no planeta. A reciclagem e/ou reutilização do resíduo de construção e demolição é a maneira mais simples de utilização, justificada pelas próprias características dos resíduos. Entre as várias aplicações do RCD na indústria da construção civil, a utilização na confecção de argamassas para revestimento se destaca pelo potencial de utilização em larga escala e pela possibilidade de emprego no próprio local da geração do resíduo. Contudo, uma argamassa de RCD para revestimento deve atender aos mesmos requisitos de qualidade de uma argamassa convencional. O presente trabalho teve como objetivo avaliar o efeito de diferentes composições de argamassas de revestimento com a incorporação de RCD sobre algumas propriedades no estado fresco e no estado endurecido. O planejamento experimental foi baseado na metodologia de projeto robusto. As variáveis investigadas e seus respectivos níveis foram: a relação Areia de RCD/Areia Total (0,25 a 0,75); relação Cimento/Aglomerante Total (0,3 a 0,7); porcentagem de cerâmica na Areia de RCD (25 a 75%) e consistência (240 a 280 mm). As variáveis de resposta foram: retenção de água e teor de ar incorporado (no estado fresco); resistência à compressão, resistência à tração na flexão, resistência de aderência e fissuração (no estado endurecido), determinadas aos 28 dias. Os resultados obtidos para a variável de resposta teor de ar incorporado mostraram que a quantidade de cimento, a consistência, a quantidade de RCD e de material cerâmico presente no RCD tiveram influência sobre esta propriedade. Para níveis elevados de cimento ocorreu um aumento no teor de ar incorporado. No entanto, em níveis elevados de quantidade de RCD e de material cerâmico se obteve uma diminuição nesta variável de resposta. Para a variável de resposta retenção de água, o fator que teve influência mais significativa foi a quantidade de cal. Observou-se também um aumento na retenção de água com o aumento da quantidade de material cerâmico e da quantidade de RCD. Quanto as resistência à compressão, à tração na flexão e de aderência, concluiu-se que a quantidade de cimento foi o fator preponderante sobre os resultados. Porém, observou-se também que a quantidade de RCD e de material cerâmico no RCD apresentaram influência significativa na resistência de aderência. Na determinação do comprimento de fissura por metro quadrado de argamassa, foi verificada a influência significativa apenas da quantidade de cimento. Em níveis elevados deste fator a fissuração é bem menor se comparada aos níveis baixos do mesmo fator. A análise de otimização em conjunto com a metodologia de projeto robusto permitiu a determinação de uma condição ótima ou uma zona ótima, onde, em princípio, são obtidas argamassas com melhor desempenho global, satisfazendo as características de desempenho exigidas e melhorando a robustez do produto. O melhor traço obtido foi para a combinação com a relação Areia de RCD/Areia Total 0,59; a relação cimento/aglomerante 0,60; a relação Areia Cerâmica/Areia de RCD 0,625; e a Consistência de 250mm
Abstract: The construction industry is responsible for much of the waste generated in the planet. Recycling and/or reusing construction and demolition waste (CDW) are the most practical way to use the characteristics of such materials. Among the various applications of the CDW in the construction industry, the use in the manufacturing of rendering mortars stands out for its potential use. However, a CDW mortar must meet the same quality requirements of a conventional mortar. This study aimed to evaluate the effect of different compositions of rendering mortars with the addition of CDW. The experimental approach used in this study was based on the methodology of robust design. The controlled variables and their ranges were: the CDW Sand/Total Sand ratio (0.25 to 0.75); the Cement/Total Binder ratio (0.3 to 0.7); the percentage of ceramic in the CDW sand (25 to 75%), and the consistency (240 to 280 mm). The response variables were: the water retention and the incorporated air content (in fresh state); the compression strength, the flexural tensile strength, adhesion strength and length of cracking (in hardened state), at 28 days of curing. The results obtained for the response variable incorporated air content showed that the amount of cement, the consistency, the amount of CDW, and the amount of ceramic material in the CDW had an influence on this property. For higher cement contents there was an increase in the incorporated air content. However, for high levels of both CDW and amount of ceramic material, a reduction in this variable was observed. For the response variable water retention, the factor that had the most significant influence was the amount of lime. Also, it was observed an increase in water retention by increasing the amount of ceramic material and the amount of CDW. Concerning the compressive strength, the flexural tensile strength, and the adhesion strength, it was concluded that the amount of cement was the main influence on the results. Also, it was observed that the amount of both CDW and ceramic material had a significant influence on the adhesion strength. Regarding the length of cracking per square meter of mortar, there was a significant influence only of the amount of cement. At higher levels of this factor there was much less cracking when compared to the low levels of the same factor. The optimization analysis in conjunction with the robust design methodology allowed the determination of an optimal condition or zone, where, in principle, mortars are obtained with better overall performance, satisfying the required performance and improving the robustness of the product. The best mixture proportion was obtained for the following combination: CDW Sand/Total Sand ratio of 0.59; Cement/Total Binder ratio of 0.60; percentage of ceramic in the CDW of 62.5%, and consistency of 250mm
Keywords: Construção civil
Resíduos como material de construção
Argamassa
Waste products as building materials
Construction
Mortar
???metadata.dc.subject.cnpq???: CNPQ::ENGENHARIAS::ENGENHARIA CIVIL
???metadata.dc.language???: por
???metadata.dc.publisher.country???: 
Publisher: 
???metadata.dc.publisher.initials???: 
???metadata.dc.publisher.department???: Engenharias
???metadata.dc.publisher.program???: Programa de Pós-Graduação em Engenharia
???metadata.dc.rights???: Acesso Aberto
URI: http://10.0.217.128:8080/jspui/handle/tede/276
Issue Date: 28-Aug-2009
Appears in Collections:Programa de Pós-Graduação em Engenharia Civil e Ambiental



Items in TEDE are protected by copyright, with all rights reserved, unless otherwise indicated.